Author Topic: How to assemble 3D starting tile (Read 1194 times)

BBG · « **on:** May 03, 2023, 12:08:02 PM »

HI. I received 3D the starting tiles but I have no idea how to assemble them. Do I have to use glue to keep the parts together? Otherwise they don't stay in place. Any tips? THANKS!

PS. I've read the attached manual but the "instructions" for assembling are non existant. They say: "assemble the box". Heh. I don't know how.

Linkback: https://www.carcassonnecentral.com/community/index.php?topic=6359.0

Challa007 · « **Reply #1 on:** May 03, 2023, 12:44:03 PM »

Hi there,
no glue is needed and the box normally stays perfectly in place.

You will find the instructions directly on the box itself. See attachment

BBG · « **Reply #2 on:** May 03, 2023, 12:46:05 PM »

Yeah I followed those instruction and nothing remained in place so I'm missing something.

EDIT. oooh you have to bend the pieces of papers INSIDE i thought it was going to be a closed box

) ok ok I did it. Another stupid question... how do I use all the tileholers? They all don't stay inside the assembled box

Challa007 · « **Reply #3 on:** May 03, 2023, 12:54:21 PM »

you need to make sure when you fold the sides that the mini tab at the bottom always goes through the small opening. This is how it is held together .... (see attachment in red)

And don't confuse outside and inside....

EDIT: haha, I did not see your reply

glad you found the trick

Challa007 · « **Reply #4 on:** May 03, 2023, 01:05:23 PM »

The tile holders have two outer sides and the space for the tiles inside. Fold at the given points and place the tiles between the two outer sides. This means that there is a "floor" on which the tiles are held..... (sorry, difficult to explain)

You can see a picture here:
https://cundco.de/zubehoer/459/3d-startlandschaft-alternativ-inlay?c=113

BBG · « **Reply #5 on:** May 03, 2023, 01:07:47 PM »

Yes but they're too much, they don't fit in a single assembled box. It only seems to contain 1x72 and 1x12... how do I use all the other tile holders?

Challa007 · « **Reply #6 on:** May 03, 2023, 01:13:09 PM »

haha, you only ordered the small set with one single inlay?
Well then not all will fit. You can adapt the tile holders to the kind of expansions you want to put in there (you have a choice)